Semperfli Fly Tying Wire - 0.2mm

Semperfli Fly Tying Wire 0.2mm

is a non-tarnishing fly-tying wire that is ideal for chironomids or buzzers and nymphs, and as ribbing on salmon flies and streamers. At 0.2 mm (0.008 inch) diameter, the non-tarnishing finish means it can even be used in saltwater. Wire 0.2mm is part of our large range of wire colors suitable for most flies.

We developed and manufactured our own computerized spooling machinery, and Wire 0.2mm is wound onto the spool with touching turns in a completely level traverse. Why is this important? With Wire 0.2mm, you will not get a bird’s nest when tying flies or have wires trapped. Our spools have a removable cap so you can re-trap the wire after removing a section to tie your flies.

Tie on Wire 0.2mm and tie off with thread. Rather than cutting, simply wiggle it and it will break, saving damage to your scissors.

Each spool of Wire 0.2mm contains approximately 20 m / 21.8 yards.

A fine, lacquer-coated fly-tying wire (~0.20 mm diameter, ≈ 32 AWG). The non-tarnish finish keeps colors bright and protects the wire from blackening. Typically supplied on compact spools (often ~20–30 m depending on color/retailer).

Why Pick 0.2 mm (vs 0.1mm / 0.3mm)?

• Works for most trout-size flies: visible rib/segmentation without getting bulky.
• Adds a touch of weight for sink and keel, but is still fine enough for slim bodies.
• Ideal for #12–16 nymphs/wets and many stillwater lures.

Typical Uses & Patterns

• Ribs: Pheasant Tail, Hare’s Ear, Copper John (lighter versions), Diawl Bach, Cruncher, Buzzers (#12–16).
• Tags & hotspots: small butt tags on spiders/soft hackles without dominating the fly.
• Counter-ribbing: over quill, biot or peacock to armor delicate bodies.
• Mini wire bodies: slim nymphs or micro buggers where you want a subtle metallic sheen.

Colours

Classic copper, gold, silver, black, and gunmetal, plus dyed olives, browns, reds, chartreuse, and hot colours. The clear lacquer keeps hues bright and resists tarnish.

Quick Hook Size Guide

• #18–20: 0.2 mm works, but keep spacing open (or drop to 0.1 mm).
• #16–12: sweet spot for ribs/tags/counter-ribs.
• #10–8: works for bolder ribs; if you want even more presence/weight, step up to 0.3 mm.

Pro Tying Tips

• “Helicopter off” the tag: twist the wire until it snaps clean for a flush finish (don’t cut it with scissors).
• Keep even, modest tension so wraps sit tight without kinking.
• For counter-ribs, space slightly wider so the wire shows through dubbing/quill.
• Start your rib one turn back from the tail to keep the abdomen slim on smaller hooks.
• When using with beads/jig hooks, tie the wire off behind the bead before seating to avoid trapping it in the slot.
• For two-tone ribs, twist two colors of 0.2 mm together—more visibility without jumping to 0.3 mm.

Quick Chooser (Wire Sizes)

• 0.1 mm: micro ribbing, #16–22, minimal weight.
• 0.2 mm: all-round trout rib for #12–16; subtle weight & visibility.
• 0.3 mm: bold ribs/tags, #8–12, lures/streamers; faster sink and extra durability.